Photo resembling
Purple Tears
Purple Tears is a balanced hybrid strain that delivers a symphony of effects, inducing a state of relaxation and happiness. Its potency is ideal for those looking to alleviate depression and inflammation, while also effectively combating headaches.
Users often experience a sleepy and tingly sensation, accompanied by an increase in appetite. The strain's aroma is a complex blend of diesel and sweet berry notes, providing a sensory delight.
The genetic lineage of Purple Tears can be traced back to the parent strains Granddaddy Purple and Pre-98 Bubba Kush, both revered for their therapeutic qualities and rich terpene profiles.
Granddaddy Purple is a famous indica strain known for its strikingly deep purple buds and sweet, grape-like aroma. It is celebrated for its potent relaxing effects, making it a popular choice for those seeking relief from pain, stress, and insomnia. The strain's rich terpene profile includes myrcene, pinene, and caryophyllene, contributing to its soothing and sedative properties.
Pre-98 Bubba Kush is a classic indica strain cherished for its earthy, coffee-like flavor and powerful sedative effects. This strain is often used to alleviate chronic pain, stress, and insomnia, providing a deeply relaxing experience. Its terpene profile is dominated by myrcene, limonene, and caryophyllene, which enhance its therapeutic qualities and contribute to its distinctive aroma.
Purple Tears thrives in a medium-sized space that allows for its moderate stretch during flowering. A tent or room should have ample vertical space to accommodate up to 6 feet of growth. Horizontal space must allow for lateral branching, with at least 2 square feet per plant to prevent overcrowding and promote air flow.
Full-spectrum LED lights are recommended for Purple Tears to support its growth from vegetative to flowering stages. Position lights to distribute an even canopy of light, ensuring lower branches receive sufficient luminescence. Adjust the height of the lights as the plant grows to prevent heat stress and optimize photosynthesis.
Proper ventilation is critical for Purple Tears to maintain air quality and prevent mold. Use an inline fan to exchange air and a carbon filter to manage odor. Introduce a CO2 enrichment system to boost growth and yield, maintaining a concentration of 700 to 1500 ppm during the light cycle.
Purple Tears requires a temperature range of 68-78°F during the day and 58-70°F at night. Humidity should be kept between 40-50% during the flowering stage to prevent bud rot. Use a combination of dehumidifiers, humidifiers, and air conditioners to maintain these conditions.
Hydroponics can accelerate Purple Tears' growth by providing nutrients directly to the roots, resulting in larger yields. However, soil cultivation can enhance the strain's berry and diesel flavors. Organic super soil, rich in nutrients, is ideal for developing the full terpene profile of Purple Tears.
As Purple Tears transitions to the vegetative stage, adjust the light schedule to 18 hours of light and 6 hours of darkness to promote growth. Implement plant training techniques such as topping or fimming to encourage a bushier canopy and more bud sites. Low-stress training (LST) can also be applied by gently bending and tying down branches to expose lower parts of the plant to light, enhancing overall yield.
Regular pruning is crucial for Purple Tears to maintain airflow and light penetration. Remove lower growth that receives little light to focus the plant's energy on top buds. Defoliation should be performed sparingly; remove only necessary leaves to improve light exposure and reduce the risk of mold. Monitor for pests and diseases, and apply organic preventive measures as needed.
Induce flowering in Purple Tears by changing the light schedule to 12 hours of light and 12 hours of darkness. This mimics the natural reduction in daylight hours and triggers the plant to enter the flowering phase. Reduce humidity to 40-50% and maintain a temperature range between 68-78°F to create optimal conditions for bud development.
During the flowering phase, Purple Tears requires a higher ratio of phosphorus and potassium to support bud formation. Introduce bloom-specific nutrients at the manufacturer's recommended dosage and gradually increase as the plant matures. Maintain a consistent feeding schedule, and monitor the plant's response to prevent nutrient burn or deficiencies.
As Purple Tears transitions to the vegetative stage, adjust the light schedule to 18 hours of light and 6 hours of darkness to promote growth. Implement plant training techniques such as topping or fimming to encourage a bushier canopy and more bud sites. Low-stress training (LST) can also be applied by gently bending and tying down branches to expose lower parts of the plant to light, enhancing overall yield.
Regular pruning is crucial for Purple Tears to maintain airflow and light penetration. Remove lower growth that receives little light to focus the plant's energy on top buds. Defoliation should be performed sparingly; remove only necessary leaves to improve light exposure and reduce the risk of mold. Monitor for pests and diseases, and apply organic preventive measures as needed.
Induce flowering in Purple Tears by changing the light schedule to 12 hours of light and 12 hours of darkness. This mimics the natural reduction in daylight hours and triggers the plant to enter the flowering phase. Reduce humidity to 40-50% and maintain a temperature range between 68-78°F to create optimal conditions for bud development.
During the flowering phase, Purple Tears requires a higher ratio of phosphorus and potassium to support bud formation. Introduce bloom-specific nutrients at the manufacturer's recommended dosage and gradually increase as the plant matures. Maintain a consistent feeding schedule, and monitor the plant's response to prevent nutrient burn or deficiencies.
Identifying the optimal harvest time for Purple Tears is critical for maximizing potency and flavor. Observe the trichomes with a magnifying glass; they transition from clear to milky white when the THC content is at its peak. Additionally, the pistils should change from white to a reddish-brown hue. Harvesting when most trichomes are milky and a portion are amber will result in the sleepy and relaxed effects characteristic of Purple Tears.
Harvesting Purple Tears requires precision to preserve trichomes and potency. Use sharp, sterilized scissors to cut the branches, removing large fan leaves. Then, delicately trim the sugar leaves that surround the buds, being careful not to overhandle the flowers to avoid trichome loss. The goal is to retain the bud structure while eliminating excess leaf material that could harbor moisture and affect the flavor profile.
Drying and curing are pivotal for enhancing Purple Tears' diesel, sweet, and berry flavors. Hang the trimmed branches upside down in a controlled environment with temperatures around 60-70°F and humidity levels between 45-55%. This slow drying process should take about 7-10 days until the stems snap rather than bend. After drying, place the buds in airtight containers, opening them daily for the first week to release moisture and replenish oxygen, known as 'burping'. Continue curing for at least two to four weeks to refine the flavors and improve the smoothness of the smoke.
Proper storage is vital to maintain the freshness and quality of Purple Tears. Store the cured buds in airtight containers, such as glass jars, in a cool, dark place to prevent degradation of cannabinoids and terpenes. Avoid exposure to direct light, heat, and excessive air, which can dry out the buds and diminish their potency and flavor. Check periodically for mold or mildew, especially if the buds were not fully dried before storage.
Selecting an optimal location is critical for the growth of Purple Tears. The site must receive ample sunlight, as cannabis thrives with at least six hours of direct sun per day. Protection from strong winds is essential to prevent physical damage to the plants and to reduce water loss. Privacy is also a key consideration to safeguard the grow area from unwanted attention and to comply with local regulations.
Purple Tears requires well-draining soil with a pH between 6.0 and 7.0. The ideal texture is a balance of sand, silt, and clay, known as loamy soil, which supports root growth and retains nutrients effectively. The soil should be rich in organic matter to provide the necessary nutrients. Amending the soil with compost, worm castings, and bat guano can improve fertility. Preparing the site involves tilling the soil to aerate it, incorporating amendments, and ensuring the soil is loose to facilitate root expansion.
Consistent access to water is vital for Purple Tears. The water source must be reliable, as cannabis plants require regular watering to maintain health and yield. In regions where rainfall is inconsistent, setting up an irrigation system is beneficial. Drip irrigation conserves water and directs it to the root zone, reducing waste and the risk of fungal diseases. Monitoring the water's pH and nutrient levels is important to maintain optimal growing conditions.
For optimal growth, Purple Tears should be planted outdoors after the last frost when soil temperatures consistently exceed 50°F. In most Northern Hemisphere climates, this period falls between late April and early May. Gardeners in warmer regions can start as early as mid-March. Monitoring local climate patterns is crucial for timing the planting of Purple Tears to avoid cold snaps that can damage young plants.
Transitioning Purple Tears seedlings or clones to the outdoor environment requires acclimatization to reduce shock. Begin by placing plants outside for a few hours each day, gradually increasing exposure over a week. Space plants at least 6 feet apart to allow for ample growth and air circulation. Upon planting, water the base of each plant generously to settle the soil and provide hydration for root establishment.
Young Purple Tears plants are vulnerable to pests, grazing animals, and harsh weather. Employ cloches or row covers for frost protection and to create a barrier against insects. Install fencing to deter animals. In regions with strong winds or heavy rain, consider temporary windbreaks or rain shields until plants are sturdy enough to withstand the elements without assistance.
Outdoor cultivation of Purple Tears requires a dynamic approach to nutrient management, adapting to the plant's changing needs through its growth stages. During the vegetative phase, a higher nitrogen mix promotes foliage growth. Transitioning to the flowering stage, phosphorus and potassium levels should be increased to support bud development. Calcium and magnesium supplements aid in plant resilience and should be included throughout the cycle. Consistent pH monitoring of the soil is critical to ensure nutrient uptake is optimized.
For outdoor Purple Tears plants, integrated pest management begins with preventive organic methods. Neem oil and insecticidal soaps serve as deterrents against common pests like spider mites and aphids. Introducing beneficial insects, such as ladybugs, can control pest populations naturally. For diseases like powdery mildew, a baking soda and water mixture can be effective. Chemical pesticides are available but should be used as a last resort due to potential impacts on plant quality and the environment.
Pruning and training are vital for maximizing Purple Tears' yield and potency. Topping, cutting the main stem above a node, encourages bushier growth and more colas. Trellising supports the plant's structure and aids in even light distribution, critical for outdoor grows. Low-stress training, gently bending and tying branches, improves sunlight penetration and air flow, reducing the risk of mold and mildew in dense canopies. Regular pruning of lower, non-productive branches also directs energy to the top growth where buds form.
To determine the optimal harvest time for Purple Tears, monitor the trichomes and pistils. Trichomes should transition from clear to a milky white color, with some turning amber for peak THC levels. Pistils will darken and curl, indicating maturity. Use a magnifying glass to observe these changes closely for precise timing.
Harvest Purple Tears by cutting the main stem, or selectively snip branches for a staggered harvest. This method allows lower buds more light and time to develop. Handle buds gently to avoid trichome damage. Clean scissors regularly during the process to maintain a clean cut and prevent contamination.
Dry Purple Tears in a well-ventilated, dark space with a consistent temperature of 60-70°F and humidity around 45-55%. Hang plants upside down or use drying racks. Curing involves placing dried buds in airtight containers, opening them daily to exchange air and release moisture. This process can take several weeks, improving flavor and potency.
Store cured Purple Tears buds in airtight containers, such as glass jars, in a cool, dark place to preserve their potency. Keep humidity levels between 59-63% with the help of humidity packs to prevent mold growth and degradation. Avoid plastic bags or containers that can cause static and damage trichomes.
Purple Tears is a hybrid cannabis strain.
Users can expect to feel sleepy, tingly, happy, hungry, and relaxed after consuming Purple Tears.
This strain has a diesel aroma with sweet and berry flavors.
Yes, Purple Tears may be beneficial for individuals with depression, headaches, and inflammation.
The THC content can vary, but Purple Tears typically has a high THC level.
Yes, Purple Tears can be cultivated both indoors and outdoors, with proper conditions.
The flowering time for Purple Tears is approximately 8-9 weeks.
Purple Tears is known for its unique combination of effects and flavors, distinguishing it from other hybrids.
Purple Tears thrives in a mild to warm climate with consistent temperatures and humidity control.
Cultivators should maintain optimal nutrient levels and watch for signs of pests or diseases to guarantee healthy growth.
