Photo resembling
Full Moon
Full Moon is a pure Sativa strain that delivers a spectrum of cerebral effects, igniting creativity and euphoria. Its spicy, herbal, and citrus notes offer an invigorating sensory experience.
Users report heightened arousal and a sense of upliftment, making it a suitable choice for combating depression, stress, and fatigue. The earthy undertones complement the strain's vibrant profile.
The genetic lineage of Full Moon traces back to the exotic and potent landrace strains from the Thai archipelago, ensuring a pure and intense Sativa heritage.
Thai Landrace strains are renowned for their pure Sativa genetics, originating from the lush, tropical regions of Thailand. These strains are celebrated for their potent cerebral effects, often inducing a sense of euphoria and heightened creativity. With a flavor profile that typically includes spicy, herbal, and citrus notes, Thai Landrace strains offer an invigorating and exotic sensory experience. Their robust and resilient nature makes them a cornerstone in the genetic lineage of many modern Sativa strains, including Full Moon.
The Full Moon strain thrives in a spacious environment, allowing for ample growth both vertically and horizontally. A room or tent measuring at least 80 inches in height will accommodate the stretch typical of Sativa plants. Horizontal space should permit at least 4 square feet per plant to allow for lateral branching. Reflective walls or surfaces can maximize light exposure, and a clutter-free space is critical for easy maintenance and air flow.
LED lights are recommended for Full Moon cultivation due to their full spectrum capabilities and energy efficiency. Positioning lights 18 to 24 inches from the canopy, adjusting as plants grow, will provide optimal light intensity without heat stress. A 12/12 light cycle initiates and maintains the flowering phase, crucial for Sativa strains that require a longer bloom period.
Proper ventilation is essential for Full Moon's growth, as it prevents mold and pests while maintaining a fresh supply of carbon dioxide. An exhaust fan at the top of the space and an oscillating fan at the canopy level will create a consistent air exchange. Introducing a CO2 enrichment system can significantly increase growth rate and yield, but it must be monitored to maintain appropriate levels for plant health.
Full Moon prefers a temperature range of 68-77°F during the day, dropping 10-15 degrees at night to mimic natural conditions. Humidity should be controlled at 40-50% during the flowering stage to prevent mold and mildew. A dehumidifier and air conditioner may be necessary to maintain these conditions, especially in climates not naturally conducive to these ranges.
Hydroponics can accelerate Full Moon's growth by providing nutrients directly to the roots and allowing greater oxygenation. However, soil cultivation can enhance the strain's spicy, herbal, and earthy flavor profile. Organic soil with a balanced pH and rich in nutrients supports the strain's needs and can improve the complexity of its terpene profile, which is beneficial for both medicinal and recreational users.
As Full Moon transitions to the vegetative stage, adjust the light schedule to 18 hours of light and 6 hours of darkness to promote growth. Implement plant training techniques such as topping to create a bushier canopy and low-stress training (LST) to expose more bud sites to light, enhancing yield potential.
Regular pruning is essential to remove non-productive lower branches that receive little light, focusing the plant's energy on top growth. Defoliation should be practiced sparingly to improve light penetration and airflow, which are critical in preventing mold and pests. Monitor plant health and adjust humidity and temperature to maintain optimal conditions.
To induce flowering in Full Moon, switch the light schedule to 12 hours of light and 12 hours of darkness. This mimics the natural decrease in daylight hours and triggers the plant to enter the flowering phase. Reduce temperatures slightly during the dark period to simulate the cooler nights of late summer.
During the flowering phase, Full Moon requires nutrients with higher phosphorus and potassium levels to support bud development. Introduce bloom-specific fertilizers according to the manufacturer's recommended feeding schedule, and reduce nitrogen intake to avoid nutrient burn and promote proper flower formation.
As Full Moon transitions to the vegetative stage, adjust the light schedule to 18 hours of light and 6 hours of darkness to promote growth. Implement plant training techniques such as topping to create a bushier canopy and low-stress training (LST) to expose more bud sites to light, enhancing yield potential.
Regular pruning is essential to remove non-productive lower branches that receive little light, focusing the plant's energy on top growth. Defoliation should be practiced sparingly to improve light penetration and airflow, which are critical in preventing mold and pests. Monitor plant health and adjust humidity and temperature to maintain optimal conditions.
To induce flowering in Full Moon, switch the light schedule to 12 hours of light and 12 hours of darkness. This mimics the natural decrease in daylight hours and triggers the plant to enter the flowering phase. Reduce temperatures slightly during the dark period to simulate the cooler nights of late summer.
During the flowering phase, Full Moon requires nutrients with higher phosphorus and potassium levels to support bud development. Introduce bloom-specific fertilizers according to the manufacturer's recommended feeding schedule, and reduce nitrogen intake to avoid nutrient burn and promote proper flower formation.
Identifying the optimal harvest time for Full Moon is critical for maximizing potency and flavor. Observe the trichomes with a magnifying glass; when most trichomes shift from clear to a milky white color, with some turning amber, harvesting time is ideal. Additionally, the pistils should darken and curl inward, indicating maturity.
Harvest Full Moon by cutting the main stem with sharp, sterilized scissors. Trim away large fan leaves and snip smaller sugar leaves close to the buds. This technique promotes airflow and reduces moisture, which is vital for preventing mold during the drying process.
Dry Full Moon buds by hanging them upside down in a controlled environment with temperatures around 60-70°F and humidity levels at 45-55%. This process should take about 7-10 days. Once stems snap instead of bend, curing begins. Place the buds in airtight containers, opening them several times a day for the first week to release moisture and then less frequently over the course of 3-4 weeks. This enhances the terpene profile and overall potency.
Store Full Moon cannabis in a cool, dark place in airtight containers with humidity control packs to maintain 62% relative humidity. This preserves the cannabinoids and terpenes, ensuring the buds remain fresh and potent for an extended period.
Selecting an optimal location is critical for the Full Moon strain's growth. The area must receive ample sunlight, as cannabis thrives with at least six hours of direct sun daily. Shielding plants from strong winds is essential to prevent physical damage and stress, while also considering privacy to comply with local regulations and personal discretion. A balance between sun exposure, wind protection, and seclusion forms the foundation for a successful Full Moon cultivation.
The Full Moon strain flourishes in soil with a pH between 6.0 and 7.0. A loamy texture, which combines sand, silt, and clay, promotes adequate drainage and root development. The soil should be rich in organic matter to provide essential nutrients. To optimize the site, integrate compost or well-rotted manure to enhance fertility. Adjusting pH and improving soil structure with amendments like lime or sulfur may be necessary based on initial soil tests.
Consistent access to water is vital for the Full Moon strain, especially during the vegetative and flowering stages. If rainfall is inconsistent, setting up an irrigation system becomes imperative. Drip irrigation conserves water and directs it to the plant's root zone, reducing waste and the risk of fungal diseases. Regularly check soil moisture and adjust watering schedules to meet the plant's needs without over-saturating the soil.
For optimal growth, Full Moon should be planted outdoors after the last frost when the soil has warmed. In most temperate climates, this period falls between late April and early June. Gardeners in warmer regions can plant as early as March, while those in cooler zones may need to wait until mid-May or June. Monitoring local weather patterns is crucial for timing the planting of Full Moon to avoid sudden temperature drops that can damage the plant.
Transitioning Full Moon seedlings or clones to the outdoor environment requires acclimatization to reduce shock. Start by placing plants outside in a shaded area for a few hours each day, gradually increasing exposure to sunlight over a week. When planting, space them at least two feet apart to allow for adequate air circulation and growth. Initial watering should saturate the soil, encouraging deep root development, but avoid waterlogging which can lead to root rot.
Young Full Moon plants are vulnerable to pests, animals, and harsh weather. Employ cloches or row covers for frost protection and to create a barrier against insects. Fencing is effective for keeping out larger animals. In areas prone to strong winds or heavy rain, consider staking plants or using windbreaks to prevent physical damage. Regular inspections for pests and signs of disease will help maintain plant health during critical early growth stages.
Outdoor Full Moon cannabis plants require a dynamic feeding schedule that aligns with their growth stages. During the vegetative phase, a higher nitrogen mix promotes foliage growth. Transitioning to the flowering stage, phosphorus and potassium levels should increase to support bud development. Calcium and magnesium are essential throughout all stages to prevent nutrient deficiencies. Organic options like compost teas can be beneficial for soil health and plant vitality.
For outdoor Full Moon strains, organic pest control methods include introducing beneficial insects like ladybugs to combat aphids and using neem oil as a natural pesticide. For diseases like powdery mildew, a baking soda and water mixture can act as a preventative foliar spray. Chemical solutions should be a last resort due to their environmental impact, but systemic insecticides and fungicides can be used following local regulations and safety guidelines.
Pruning Full Moon plants involves removing lower growth to enhance air flow and light penetration, which is crucial for preventing mold and mildew. Topping, cutting the main stem above a node, encourages bushier growth and more colas. Trellising supports the plant structure and optimizes space. Low-stress training, gently bending and tying branches, maximizes light exposure without stressing the plant, leading to a more even canopy and increased yield potential.
To determine the optimal harvest time for Full Moon, a sativa strain, closely examine the trichomes and pistils. Trichomes should transition from clear to a milky white color, indicating peak THC levels. Some may turn amber, signaling increased sedative effects. Pistils, initially white, should darken to a reddish-brown hue, signifying maturity. Use a magnifying glass or jeweler's loupe to inspect these microscopic features accurately.
Efficient harvesting of Full Moon involves cutting the plant at its base and hanging it upside down in a cool, dark space. This method allows for even drying. To maximize yield and potency, remove large fan leaves and trim sugar leaves that contain trichomes. These can be saved for making concentrates. A clean, sharp pair of scissors will help avoid damaging the plant's delicate structures.
Drying and curing Full Moon outdoors or in non-controlled environments require close attention to humidity and temperature. Aim for a consistent humidity level around 45-55% and a temperature range of 60-70°F (15-21°C). Protect the plants from direct sunlight and rain, and ensure good air circulation to prevent mold. Curing involves placing the dried buds in airtight containers, opening them daily for the first week to release moisture and check for mold. This process can take two to four weeks, improving flavor and potency.
Store Full Moon buds in airtight containers, such as glass jars, to maintain potency and prevent mold. Keep these containers in a cool, dark place to avoid degradation of cannabinoids and terpenes. Avoid plastic bags or containers that can cause static and damage trichomes. Monitor the stored buds regularly for any signs of mold or moisture and use desiccant packs to control humidity if necessary.
Full Moon is a Sativa-dominant strain.
Users typically experience feelings of arousal, creativity, euphoria, happiness, and upliftment.
Full Moon is known for its spicy/herbal, citrus, and earthy notes.
Full Moon may be beneficial for individuals dealing with depression, stress, and fatigue.
The THC content can vary, but Full Moon generally has high THC levels.
Full Moon is considered to be a potent strain with strong cerebral effects, in line with other high-THC Sativas.
Yes, due to its energizing and uplifting effects, Full Moon is suitable for daytime use.
Consumption methods like vaporizing or smoking are effective, but individual preferences and tolerances play a role.
Store Full Moon in a cool, dark place in an airtight container to preserve its potency and flavor.
Due to its high THC content, novice users should approach Full Moon with caution and start with a low dose.
When grown indoors, Full Moon typically flowers in about 10 to 12 weeks.
Full Moon can be grown outdoors in a warm, sunny climate with a long summer.
